PLAST PF ADDITIVES

PLAST PF ADDITIVES
PRODUCT DESCRIPTION
PLAST PF ADDITIVO 378 Viscosity reducer. It reduces ink viscosity without compromising its opacity.
(it may be used in a maximum percentage of 0,5%)
PLAST PF ADDITIVO 86 Thinner. It fluidizes the ink making it more elastic soft and glossy. It improves the printability.
(It may be used in a maximum percentage of 5%)
PLAST PF ADDITIVO 24 Thinner. It fluidizes the ink making it more elastic soft and glossy. It improves the printability.
(It may be used in a maximum percentage of 2%)
PLAST PF CURABLE REDUCER It reduces ink viscosity without compromising flash cure time.
(It may be used in a maximum percentage of 10%)
PLAST PF ADDENSANTE 740 Thickner. It increases ink viscosity in 4 hours time.
(It may be used in a maximum percentage of 0,1%)
PLAST PF ADDITIVO E Elasticizing additive. It increases elasticity of the ink. Suitable for lycra or other elastic fabrics.
(It may be used in a maximum percentage of 5%)
PLAST PF PROMOTEX Hardener/fixer to increase adhesion and wash fastness. Suitable to be used onto synthetic fabrics or in case of post-treatments (over-dyeing or stone wash).
(It may be used in a percentage from 15% to 25%)
PLAST PF FIBER BOND Hardener/fixer to improve wash fastness and increase the resistance on the most difficult substrates (i.e. Nylon).
(It may be used in a percentage from 7% to 10%)
PLAST PF ADDITIVO UP Additive to achieve a puff 3D effect without changing printability, brightness and wash fastness.
(It may be used in a percentage from 5% and 20%)
PLAST PF ADDITIVO BLISTER Additive to achieve a “POP CORN” 3D effect.
(It may be used in a percentage from 5% and 20%)

 


© 2024 - AMEX s.r.l. P.I. IT00757440136 | Privacy Policy